作者 主題: mailscanner使用問題,突然不檔廣告信  (閱讀 5366 次)

0 會員 與 1 訪客 正在閱讀本文。

飛鳥

  • 懷疑的國中生
  • **
  • 文章數: 43
    • 檢視個人資料
MailScanner之前都會檔的,就在前天晚上,不知發生什麼問題,就突然不會分析廣告信了


原以為log檔過大,但好像又跟那個沒有關係

maillog有這很多這個訊息
引用
Jan 19 17:27:43 wind-records MailScanner[32251]: Enabling SpamAssassin auto-whitelist functionality...

還有這一些
引用
Jan 19 17:45:07 wind-records MailScanner-MRTG[32749]: Unable to find a mountpoint for /var/spool.  Please set Spool Directory in mailscanner-mrtg.conf to a valid mountpoint.  You can see a list of mointpoints on your system by using the df command.
Jan 19 17:45:07 wind-records MailScanner-MRTG[32749]: Unable to find a mountpoint for /var/spool/MailScanner/incoming.  Please set MailScanner Work Directory in mailscanner-mrtg.conf to a valid mountpoint.  You can see a list of mointpoints on your system by using the df command
Jan 19 17:50:06 wind-records MailScanner-MRTG[425]: ERROR: iptraffic counters not fully initialised - no iptraffic data on this run.  This is normal on the first run, or when the previous run was more than 5 minutes ago (e.g. when rebooting).  If these errors persist over multiple runs please check that snmpd is running on your system.  If you don't want to run snmp please ensure that you have disabled it in mailscanner-mrtg.conf.  For more hints about snmp see README.SNMP in the docs directory
Jan 19 17:50:06 wind-records MailScanner-MRTG[425]: Unable to find a mountpoint for /var/spool.  Please set Spool Directory in mailscanner-mrtg.conf to a valid mountpoint.  You can see a list of mointpoints on your system by using the df command.
Jan 19 17:50:06 wind-records MailScanner-MRTG[425]: Unable to find a mountpoint for /var/spool/MailScanner/incoming.  Please set MailScanner Work Directory in mailscanner-mrtg.conf to a valid mountpoint.  You can see a list of mointpoints on your system by using the df command
Jan 19 17:55:06 wind-records MailScanner-MRTG[625]: ERROR: iptraffic counters not fully initialised - no iptraffic data on this run.  This is normal on the first run, or when the previous run was more than 5 minutes ago (e.g. when rebooting).  If these errors persist over multiple runs please check that snmpd is running on your system.  If you don't want to run snmp please ensure that you have disabled it in mailscanner-mrtg.conf.  For more hints about snmp see README.SNMP in the docs directory
Jan 19 17:55:06 wind-records MailScanner-MRTG[625]: Unable to find a mountpoint for /var/spool.  Please set Spool Directory in mailscanner-mrtg.conf to a valid mountpoint.  You can see a list of mointpoints on your system by using the df command.
Jan 19 17:55:06 wind-records MailScanner-MRTG[625]: Unable to find a mountpoint for /var/spool/MailScanner/incoming.  Please set MailScanner Work Directory in mailscanner-mrtg.conf to a valid mountpoint.  You can see a list of mointpoints on your system by using the df command
Jan 19 18:00:07 wind-records MailScanner-MRTG[829]: ERROR: iptraffic counters not fully initialised - no iptraffic data on this run.  This is normal on the first run, or when the previous run was more than 5 minutes ago (e.g. when rebooting).  If these errors persist over multiple runs please check that snmpd is running on your system.  If you don't want to run snmp please ensure that you have disabled it in mailscanner-mrtg.conf.  For more hints about snmp see README.SNMP in the docs directory
Jan 19 18:00:07 wind-records MailScanner-MRTG[829]: Unable to find a mountpoint for /var/spool.  Please set Spool Directory in mailscanner-mrtg.conf to a valid mountpoint.  You can see a list of mointpoints on your system by using the df command.
Jan 19 18:00:07 wind-records MailScanner-MRTG[829]: Unable to find a mountpoint for /var/spool/MailScanner/incoming.  Please set MailScanner Work Directory in mailscanner-mrtg.conf to a valid mountpoint.  You can see a list of mointpoints on your system by using the df command
Jan 19 18:05:07 wind-records MailScanner-MRTG[1092]: ERROR: iptraffic counters not fully initialised - no iptraffic data on this run.  This is normal on the first run, or when the previous run was more than 5 minutes ago (e.g. when rebooting).  If these errors persist over multiple runs please check that snmpd is running on your system.  If you don't want to run snmp please ensure that you have disabled it in mailscanner-mrtg.conf.  For more hints about snmp see README.SNMP in the docs directory
Jan 19 18:05:07 wind-records MailScanner-MRTG[1092]: Unable to find a mountpoint for /var/spool.  Please set Spool Directory in mailscanner-mrtg.conf to a valid mountpoint.  You can see a list of mointpoints on your system by using the df command.
Jan 19 18:05:07 wind-records MailScanner-MRTG[1092]: Unable to find a mountpoint for /var/spool/MailScanner/incoming.  Please set MailScanner Work Directory in mailscanner-mrtg.conf to a valid mountpoint.  You can see a list of mointpoints on your system by using the df command
Jan 19 18:10:07 wind-records MailScanner-MRTG[1369]: ERROR: iptraffic counters not fully initialised - no iptraffic data on this run.  This is normal on the first run, or when the previous run was more than 5 minutes ago (e.g. when rebooting).  If these errors persist over multiple runs please check that snmpd is running on your system.  If you don't want to run snmp please ensure that you have disabled it in mailscanner-mrtg.conf.  For more hints about snmp see README.SNMP in the docs directory
Jan 19 18:10:07 wind-records MailScanner-MRTG[1369]: Unable to find a mountpoint for /var/spool.  Please set Spool Directory in mailscanner-mrtg.conf to a valid mountpoint.  You can see a list of mointpoints on your system by using the df command.
Jan 19 18:10:07 wind-records MailScanner-MRTG[1369]: Unable to find a mountpoint for /var/spool/MailScanner/incoming.  Please set MailScanner Work Directory in mailscanner-mrtg.conf to a valid mountpoint.  You can see a list of mointpoints on your system by using the df command
Jan 19 18:15:06 wind-records MailScanner-MRTG[1514]: ERROR: iptraffic counters not fully initialised - no iptraffic data on this run.  This is normal on the first run, or when the previous run was more than 5 minutes ago (e.g. when rebooting).  If these errors persist over multiple runs please check that snmpd is running on your system.  If you don't want to run snmp please ensure that you have disabled it in mailscanner-mrtg.conf.  For more hints about snmp see README.SNMP in the docs directory
Jan 19 18:15:06 wind-records MailScanner-MRTG[1514]: Unable to find a mountpoint for /var/spool.  Please set Spool Directory in mailscanner-mrtg.conf to a valid mountpoint.  You can see a list of mointpoints on your system by using the df command.
Jan 19 18:15:06 wind-records MailScanner-MRTG[1514]: Unable to find a mountpoint for /var/spool/MailScanner/incoming.  Please set MailScanner Work Directory in mailscanner-mrtg.conf to a valid mountpoint.  You can see a list of mointpoints on your system by using the df command


先感謝大家 :P

twu2

  • 管理員
  • 俺是博士!
  • *****
  • 文章數: 5396
  • 性別: 男
    • 檢視個人資料
    • http://blog.teatime.com.tw/1
mailscanner使用問題,突然不檔廣告信
« 回覆 #1 於: 2006-01-19 19:16 »
要不要拿本字典來翻譯一下那些錯誤訊息呢?
還是想請人幫你翻呢?

飛鳥

  • 懷疑的國中生
  • **
  • 文章數: 43
    • 檢視個人資料
mailscanner使用問題,突然不檔廣告信
« 回覆 #2 於: 2006-01-20 11:42 »
重新開機就可以,不知道是什麼問題?

我下
#service MailScanner restart

#service MailScanner reload

都不行,好像是mount磁區的問題吧
因為都是一直路徑問題,還是虛擬記憶體?

如果下一次有遇到,再研究是那裡的問題…謝謝~

paulso

  • 俺是博士!
  • *****
  • 文章數: 1966
    • 檢視個人資料
mailscanner使用問題,突然不檔廣告信
« 回覆 #3 於: 2006-01-23 18:20 »
那些 log 寫得很清楚:
Unable to find a mountpoint for /var/spool. Please set Spool Directory in mailscanner-mrtg.conf to a valid mountpoint. You can see a list of mointpoints on your system by using the df command.