作者 主題: 求助關於usb的問題  (閱讀 1905 次)

0 會員 與 1 訪客 正在閱讀本文。

aaronosos

  • 懷疑的國中生
  • **
  • 文章數: 43
    • 檢視個人資料
求助關於usb的問題
« 於: 2005-09-22 16:12 »
今天灌好fedora3~然後插入USB輸入時mount /dev/sdb /media/usbdisk
一直出現ERROR,錯誤訊息入下
SCSI error:<1 0 0 0>return code = 0x10070000
end_request: I/O error,dev sdb,sector 0
FAT:unable to read boot sector
mount:/dev/sdb:can't read superblock
請問這是什麼問題呢?


輸入vi /proc/scsi/scsi後得知
Host:scsi0 Channel: 00   ID: 00   LUN: 00
Vendor:ATA MODEL:WDC WD1200JD-00H Rev:08.0
type:Direct-Access ANSI SCSI revision: 05

Host:scsi0 Channel: 00   ID: 00   LUN: 00
Vendor:LEO MODEL:MobilDisk 64MB Rev:1.89
type:Direct-Access ANSI SCSI revision: 02

我在想是不是因為scsiID的問題都是0?如果是的話我應如何解決呢?請版主解答一下謝謝

fdisl -l /dev/sdb訊息如下
Disk /dev/sdb: 65 MB, 65404928 bytes
3 heads, 42 sectors/track, 1013 cylinders
Units = cylinders of 126 * 512 = 64512 bytes

Device Boot Start End Blocks Id System
/dev/sdb1 ? 6175682 15235283 570754815+ 72 Unknown
Partition 1 has different physical/logical beginnings (non-Linux?):
phys=(357, 116, 40) logical=(6175681, 2, 19)
Partition 1 has different physical/logical endings:
phys=(357, 32, 45) logical=(15235282, 0, 7)
Partition 1 does not end on cylinder boundary.
/dev/sdb2 ? 1338806 16704110 968014120 65 Novell Netware
386
Partition 2 has different physical/logical beginnings (non-Linux?):
phys=(288, 115, 43) logical=(1338805, 2, 9)
Partition 2 has different physical/logical endings:
phys=(367, 114, 50) logical=(16704109, 0, 2
Partition 2 does not end on cylinder boundary.
/dev/sdb3 ? 14840330 30205633 968014096 79 Unknown
Partition 3 has different physical/logical beginnings (non-Linux?):
phys=(366, 32, 33) logical=(14840329, 0, 12)
Partition 3 has different physical/logical endings:
phys=(357, 32, 43) logical=(30205632, 0, 25)
Partition 3 does not end on cylinder boundary.
/dev/sdb4 ? 22902232 22902672 27749+ d Unknown
Partition 4 has different physical/logical beginnings (non-Linux?):
phys=(372, 97, 50) logical=(22902231, 1, 5)
Partition 4 has different physical/logical endings:
phys=(0, 10, 0) logical=(22902671, 2, 21)
Partition 4 does not end on cylinder boundary.

Partition table entries are not in disk order

lsmod也得知vfat已被載入~/etc/fstab也都OK~可以解說給小弟元因為何不行mount -t vfat /dev/sdb /media/usbdisk嗎?