作者 主題: SUS的問題!!  (閱讀 3858 次)

0 會員 與 1 訪客 正在閱讀本文。

chris1129

  • 憂鬱的高中生
  • ***
  • 文章數: 142
    • 檢視個人資料
SUS的問題!!
« 於: 2004-12-28 16:47 »
採用 windows 2003 升完AD
將wuau.adm 透過GPO去設定,採用下列方法去做設定:
但設定好後,clinet端 登入網域後時間到了,沒看見AU,IIS也重新啟動了,
請問還有那兒需要注意的?

To load policy settings using Group Policy in Active Directory
1.   You will need the WUAU.adm file that describes the new policy settings for the Automatic Updates client. WUAU.adm is automatically installed into the %windir%\inf folder when you install Automatic Updates.
2.   You can load %windir%\inf\wuau.adm as an administrative template in the Group Policy Object Editor.
3.   On an Active Directory domain controller, click Start, and then click Run.
4.   Type DSA.msc to load the Active Directory Users and Computers snap-in.
5.   Right-click the Organizational Unit (OU) or domain where you want to create the policy, and then click Properties.
6.   Click the Group Policy tab, and then click New.
7.   Type a name for the policy, and then click Edit. This opens the Group Policy Object Editor.
8.   Under either Computer Settings or User Settings, right-click Adm You will need the WUAU.adm file that describes the new policy settings for Automatic Updates. WUAU.adm is automatically installed into the %windir%\inf directory when you install Automatic Updates.
9.   You can load %windir%\inf\wuau.adm as an administrative template in the Group Policy Object Editor:
10.   Click Start, and then click Run.
11.   Type GPEDIT.msc to load the Group Policy snap-in.
12.   Under Computer Configuration, right-click Administrative Templates.
13.   Click Add/Remove Templates, and then click Add.
14.   Enter the name of the Automatic Updates ADM file: %windir%\inf\WUAU.adm
15.   Click Open, and then click Close to load the wuau.adm file.

chris1129

  • 憂鬱的高中生
  • ***
  • 文章數: 142
    • 檢視個人資料
Re: SUS的問題!!
« 回覆 #1 於: 2004-12-29 15:53 »
引述: "chris1129"
採用 windows 2003 升完AD
將wuau.adm 透過GPO去設定,採用下列方法去做設定:
但設定好後,clinet端 登入網域後時間到了,沒看見AU,IIS也重新啟動了,
請問還有那兒需要注意的?

To load policy settings using Group Policy in Active Directory
1.   You will need the WUAU.adm file that describes the new policy settings for the Automatic Updates client. WUAU.adm is automatically installed into the %windir%\inf folder when you install Automatic Updates.
2.   You can load %windir%\inf\wuau.adm as an administrative template in the Group Policy Object Editor.
3.   On an Active Directory domain controller, click Start, and then click Run.
4.   Type DSA.msc to load the Active Directory Users and Computers snap-in.
5.   Right-click the Organizational Unit (OU) or domain where you want to create the policy, and then click Properties.
6.   Click the Group Policy tab, and then click New.
7.   Type a name for the policy, and then click Edit. This opens the Group Policy Object Editor.
8.   Under either Computer Settings or User Settings, right-click Adm You will need the WUAU.adm file that describes the new policy settings for Automatic Updates. WUAU.adm is automatically installed into the %windir%\inf directory when you install Automatic Updates.
9.   You can load %windir%\inf\wuau.adm as an administrative template in the Group Policy Object Editor:
10.   Click Start, and then click Run.
11.   Type GPEDIT.msc to load the Group Policy snap-in.
12.   Under Computer Configuration, right-click Administrative Templates.
13.   Click Add/Remove Templates, and then click Add.
14.   Enter the name of the Automatic Updates ADM file: %windir%\inf\WUAU.adm
15.   Click Open, and then click Close to load the wuau.adm file.


另外,小弟參考了這篇文章
http://www.faqshop.com/sus/default.htm?http://faqshop.com/sus/general/basic%20trobshootting%20sus.htm#Top

上面說SUS SEVER安裝好 要等17-22小時,才可以正常服務?這是真的嗎?

chris1129

  • 憂鬱的高中生
  • ***
  • 文章數: 142
    • 檢視個人資料
Re: SUS的問題!!
« 回覆 #2 於: 2004-12-29 16:28 »
小弟在xp下發現兩個log檔,上網查詢到以下資料:(提供給各位參考)
Q. Why do I see 2 log files for Windowsupdate in C:\Windows directory?
A. If you have XP SP#2 installed, You should have two logs in SP2
Windows Update.log (v4) AND
windowsupdate.log (v5)

另外再來補充資料,現在使用windows xp 做client端測試
在windows\windwosupdate.log內容如下:
2004-12-29 15:35:04 07:35:04 Success IUENGINE Starting
2004-12-29 15:35:05 07:35:05 Success IUENGINE Determining machine configuration
2004-12-29 15:35:06 07:35:06 Success IUENGINE Querying software update catalog from http://163.22.168.40/autoupdate/getmanifest.asp
2004-12-29 15:35:06 07:35:06 Success IUENGINE Determining machine configuration
2004-12-29 15:35:06 07:35:06 Success IUENGINE Querying software update catalog from http://163.22.168.40/autoupdate/getmanifest.asp
2004-12-29 15:35:06 07:35:06 Success IUENGINE Determining machine configuration
2004-12-29 15:35:07 07:35:07 Success IUENGINE Querying software update catalog from http://163.22.168.40/autoupdate/getmanifest.asp
2004-12-29 15:35:09 07:35:09 Success IUENGINE Determining machine configuration
2004-12-29 15:35:11 07:35:11 Error IUENGINE Querying software update catalog from http://163.22.168.40/autoupdatedrivers/getmanifest.asp (Error 0x80190194)
2004-12-29 15:35:11 07:35:11 Success IUENGINE Shutting down


出現錯誤,163.22.168.40不是小弟sus的ip address,弟的ip為192.168.1.21
請問那兒出了問題?我在sus裡做的設定為http://192.168.1.21/sus
有前輩可以點出問題所在點?小弟再去查証。謝謝

zoob

  • 鑽研的研究生
  • *****
  • 文章數: 776
    • 檢視個人資料
    • http://www.myunix.idv.tw
SUS的問題!!
« 回覆 #3 於: 2004-12-30 23:52 »
確認你的Client (Windows XP)的registry

1.有確認過群組原則是否有正常下載以及確認Registry是否如下範例所示?

代碼: [選擇]

[HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\WindowsUpdate\AU]
"AUOptions"=dword:00000002
"NoAutoUpdate"=dword:00000000
"ScheduledInstallDay"=dword:00000000
"ScheduledInstallTime"=dword:00000003
"UseWUServer"=dword:00000001

[HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\WindowsUpdate]
"WUServer"="http://SUS SERVER"
"WUStatusServer"=http://SUS SERVER  

chris1129

  • 憂鬱的高中生
  • ***
  • 文章數: 142
    • 檢視個人資料
SUS的問題!!
« 回覆 #4 於: 2005-01-05 11:17 »
引述: "zoob"
確認你的Client (Windows XP)的registry

1.有確認過群組原則是否有正常下載以及確認Registry是否如下範例所示?

代碼: [選擇]

[HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\WindowsUpdate\AU]
"AUOptions"=dword:00000002
"NoAutoUpdate"=dword:00000000
"ScheduledInstallDay"=dword:00000000
"ScheduledInstallTime"=dword:00000003
"UseWUServer"=dword:00000001

[HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\WindowsUp
date]
"WUServer"="http://SUS SERVER"
"WUStatusServer"=http://SUS SERVER  



嗯 確認過了,沒有問題,好幾天沒去理sus了,今天開机登入後,去看了log檔,發現正常了,系統也可以正常去執行AU了,謝謝大家!!在相關文件中,看見設定好要等一段時間才能生效,或許就是這個原因吧 :P