duncan兄:
關鍵的設定檔是不是protocol.ini這個檔呀?
但是看不太懂,不知如何下手.方便的話請教教小弟~
小弟的相關設定檔如下.
config.sys:
----------------------------
DEVICE=C:\LANMAN.DOS\DRIVERS\DOSUTILS\HIMEM.SYS
DEVICE=C:\LANMAN.DOS\DRIVERS\DOSUTILS\EMM386.EXE NoEMS
LASTDRIVE=Z
DOS=HIGH,UMB
DEVICE=C:\LANMAN.DOS\DRIVERS\PROTMAN\PROTMAN.DOS /i:C:\LANMAN.DOS
DEVICE=a:\dlkfet.dos -->這行原本是NE2000_NIC的檔案,我改了.
DEVICE=C:\LANMAN.DOS\DRIVERS\PROTOCOL\tcpip\tcpdrv.dos /i:C:\LANMAN.DOS
DEVICE=C:\LANMAN.DOS\DRIVERS\PROTOCOL\tcpip\nemm.dos
--------------------------------
autoexec.bat
---------------------------------
@REM ==== LANMAN 2.2a == DO NOT MODIFY BETWEEN THESE LINES == LANMAN 2.2a ====
SET PATH=C:\LANMAN.DOS\BASIC;%PATH%
C:\LANMAN.DOS\DRIVERS\PROTOCOL\tcpip\umb.com
LOAD TCPIP
NET START WORKSTATION new
@REM ==== LANMAN 2.2a == DO NOT MODIFY BETWEEN THESE LINES == LANMAN 2.2a ====
---------------------------------
protocol.ini
--------------------------------
[PROTMAN]
DRIVERNAME = PROTMAN$
DYNAMIC = YES
PRIORITY = NETBEUI
[TCPIP_XIF]
DRIVERNAME = TCPIP$
IPADDRESS0 =
SUBNETMASK0 =
DEFAULTGATEWAY0 =
NBSESSIONS = 6
; the following two parameters added after documentation was completed
TCPSEGMENTSIZE = 1450
TCPWINDOWSIZE = 1450
LOAD = tcptsr[c],tinyrfc[c],emsbfr[cr]
UNLOAD = "unloadt /notsr[dc]"
BINDINGS = "NE2000_NIF"
NETFILES = C:\LANMAN.DOS\ETC
LANABASE = 0
[NE2000_NIF]
; protocol.ini section for the Novell NE2000 Card
IOBASE = 0x300
INTERRUPT = 3
DRIVERNAME = MS2000$
--------------------------------
